Arrow - NFT Artwork

The work is currently in an original single .jpg digital file Available as NFT Unique Original Copy after purchase it will be sent to the wallet address indicated via Binance NFT (BNB Smart Chain) or Open Sea or (Ethereum network) Available as Original Unique Physical Work it will be created by the artist as an Oil Painting on Canvas but available after 60 days and slightly different from the digital copy Always guaranteed satisfied or refunded for any reason It's easy to make your own archery kit, once you have the right equipment. For this you need: a 5-foot branch and a 1 or 2 foot branch for the arrow; hemp string; feathers; flint stone or metal; dead sticks of about 12 to 18 inches; feathers; cardboard; and a knife. For the bow, choose a piece of dead wood, preferably bendable and at least an inch in diameter and 5 foot long. Cut two notches in the branch, about 1 1/2 inches from each end. The notches should go about halfway into the bow and must be on the side of the bow opposite from the branch's natural curve. The smaller branches are for the arrows. Make these as straight as possible, sanding them if needed. Cut one notch at the end of the arrow, creating a nice hook. This is where the string will sit at the end of the arrow, so make a nice deep groove. Next cut a piece of your hemp string about three fourths of the length of the bow. It must be smaller than the bow. Tie loops at each end of the string that are big enough to fit around the notch that you made in the last step. Take the loops that you just tied and put them around the notches on each end of the stick.